Whole-Home Rewire in Round Rock, TX
A whole-home rewire in Round Rock replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in Round Rock: $8,400–$26,250
- Serving Round Rock & Round Rock & Surrounding Areas
- Licensed by TDLR (Texas Dept. of Licensing and Regulation) — verify at tdlr.texas.gov
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in Round Rock, TX
A whole-home rewire in Round Rock replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in Round Rock costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the Round Rock network are licensed through TDLR (Texas Dept. of Licensing and Regulation) — verify at tdlr.texas.gov and carry full general liability and workers' compensation insurance. Permits are pulled through the Round Rock Building Department. Round Rock experiences severe weather events — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in Round Rock, TX
Any of these indicators warrants a call to a licensed Round Rock electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed Round Rock electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in Round Rock
What to expect from a licensed Round Rock electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in Round Rock, TX
Typical price ranges based on Round Rock, TX market data. Your actual cost depends on project scope and materials.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects Round Rock, TX market rates. Actual cost may vary. Always get a written quote before work begins.
Other Electrical Services in Round Rock, TX
For Electrical Professionals
Are you an electrical contractor serving Round Rock?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.