Whole-Home Rewire in Los Angeles, CA
A whole-home rewire in Los Angeles replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in Los Angeles: $6,700–$20,070
- Serving Los Angeles & Los Angeles & Surrounding Areas
- Licensed by State Contractor Licensing Board
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in Los Angeles, CA
A whole-home rewire in Los Angeles replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
In California, a whole-home rewire requires a licensed C-10 electrical contractor and multiple inspection phases: rough (before drywall) and final. Many insurers require documentation that the rewire was permitted and inspected. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in Los Angeles costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the Los Angeles network are licensed through State Contractor Licensing Board and carry full general liability and workers' compensation insurance. Permits are pulled through City of Los Angeles Department of Building and Safety. Los Angeles experiences wildfires and high winds — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in Los Angeles, CA
Any of these indicators warrants a call to a licensed Los Angeles electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed Los Angeles electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in Los Angeles
What to expect from a licensed Los Angeles electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in Los Angeles, CA
Electrical work in Los Angeles reflects the region's competitive contractor market and Mediterranean climate demands. Pricing varies based on job complexity, permit requirements, and the specific neighborhood where work takes place. Get quotes from licensed local electricians to see accurate costs for your project.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects Los Angeles, CA market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in Los Angeles, CA
How much does an electrician cost in Los Angeles, CA?
Licensed electricians in Los Angeles charge $100–$165 per hour for labor, plus material costs and required permits. A simple outlet installation runs $150–$300, ceiling fan installation costs $200–$400, and a full kitchen rewire ranges $1,500–$3,500. All pricing includes the electrical permit required by Los Angeles Building Department. Service calls typically cost $75–$150. Get free quotes from ProvenQuote-verified electricians in Los Angeles to compare exact pricing for your specific project before hiring.
Do I need a permit to upgrade my electrical panel in Los Angeles?
Electrical panel upgrades always require a permit in Los Angeles — unpermitted work violates California electrical code and can result in fines, insurance claim denials, and sale complications. The Los Angeles Building Department issues all electrical permits. Licensed electricians must hold a California Contractors State License Board (CSLB) C-10 Electrical Contractor License; verify at cslb.ca.gov. Permits ensure your upgrade meets current codes and passes required inspections. Never hire an electrician unwilling to pull permits. ProvenQuote-verified electricians in Los Angeles handle all permitting and inspections automatically.
How much does a 200 amp panel upgrade cost in Los Angeles?
A 200 amp panel upgrade in Los Angeles costs $2,500–$5,000 installed, including permit, inspection, and utility coordination with LADWP. The upgrade covers labor, new breaker panel, disconnects, and electrical inspection. You qualify for a 30% federal tax credit up to $600 under the Inflation Reduction Act if upgrading to support electric vehicles or renewable energy. Panel upgrades become necessary for EV charger installation, solar systems, or modern electrical loads. All work requires a Los Angeles Building Department permit. Compare free quotes from licensed electricians on ProvenQuote today.
How long does EV charger installation take?
Level 2 EV charger installation in Los Angeles takes 2–4 hours for a standard hardwired setup, plus 1–2 weeks for the required Los Angeles Building Department electrical permit. Installation includes wiring, circuit breaker, weatherproof outlet, and inspection. You qualify for a federal 30% Inflation Reduction Act tax credit up to $1,000 for charger installation through 2032, plus LADWP rebates up to $500. A Level 2 charger costs $400–$1,200 installed. Panel upgrades may cost extra ($2,500–$5,000) if your current service is insufficient. Get free EV charger quotes from ProvenQuote-verified Los Angeles electricians.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in homes built between 1965–1973 is a fire hazard — the U.S. Consumer Product Safety Commission confirmed aluminum wiring causes overheating at connection points. Many Mediterranean-style Los Angeles homes from this era contain aluminum wiring. Dangers include flickering lights, warm outlets, and electrical fires. Remediation requires pigtailing (copper extensions to outlets) costing $500–$2,000 or full rewiring ($3,000–$8,000+). A licensed California electrician can inspect your panel free or for $100–$200. ProvenQuote-verified electricians in Los Angeles assess and repair aluminum wiring safely.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in Los Angeles immediately if breakers trip repeatedly, you smell burning plastic, you have fewer than 200 amps, or your home has defective brands like Zinsco, Federal Pacific, or Pushmatic panels. Panels over 30–40 years old typically fail and create fire hazards. Other red flags include rust, corrosion, or previous water damage inside the panel box. A licensed electrician inspection costs $150–$300 and identifies exact problems. Panel replacement runs $2,500–$5,000. Schedule a free ProvenQuote inspection from a verified Los Angeles electrician to assess your panel's safety.
Are there rebates for electrical upgrades in Los Angeles, CA?
Los Angeles homeowners qualify for multiple electrical rebates and tax incentives totaling thousands of dollars. LADWP offers EV charger rebates up to $500; the federal Inflation Reduction Act provides 30% tax credits up to $1,000 for EV charger installation and 30% up to $600 for panel upgrades supporting renewable energy. California's Solar and Storage Initiative Program covers battery storage. The Home Energy Efficiency Rebate Act (HEEHRA) assists low-to-moderate income households. Total potential rebates: $4,000–$7,000 for combined upgrades. ProvenQuote-verified electricians in Los Angeles help identify and apply for all available incentives.
How do I find a licensed electrician in Los Angeles?
Licensed electricians in California are regulated by the California Contractors State License Board (CSLB) — verify C-10 Electrical Contractor Licenses at cslb.ca.gov before hiring. Legitimate Los Angeles electricians carry state licenses, $1 million+ liability insurance, workers' compensation, and maintain permit histories. Request proof of insurance and license numbers. ProvenQuote-verified electricians in Los Angeles pass background checks, licensing verification, and customer reviews. Get free quotes from multiple vetted electricians through ProvenQuote's marketplace — compare pricing, credentials, and estimates without obligation before selecting your licensed electrician.
Other Electrical Services in Los Angeles, CA
For Electrical Professionals
Are you an electrical contractor serving Los Angeles?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.