Panel Upgrade in Cedar Park, TX
A 200-amp panel upgrade in Cedar Park involves replacing your electrical service entrance, installing a new main breaker panel, utility coordination (Austin Energy or local utility requires a temporary disconnect), and a city electrical inspection before the utility reconnects service. Plan for 1–2 days of work plus 2–6 weeks for utility scheduling..
Typical panel upgrade costs in Cedar Park: $1,500–$4,500
- Serving Cedar Park & Cedar Park & Surrounding Areas
- Licensed by TDLR (Texas Dept. of Licensing and Regulation) — verify at tdlr.texas.gov
- Free Estimates
- Response in <2 Hours
Panel Upgrade in Cedar Park, TX
A 200-amp panel upgrade in Cedar Park involves replacing your electrical service entrance, installing a new main breaker panel, utility coordination (Austin Energy or local utility requires a temporary disconnect), and a city electrical inspection before the utility reconnects service. Plan for 1–2 days of work plus 2–6 weeks for utility scheduling.
In Texas, TDLR-licensed electricians handle all panel work. The permit process in Cedar Park typically adds $200–$500 to the project cost but is non-negotiable — unpermitted panel work creates serious insurance and resale liability.
A straightforward 200-amp upgrade in Cedar Park costs $1,500–$5,500 in most markets, $2,000–$7,000 in high-cost metros like LA and NYC. Homes that also need a meter socket upgrade or service entrance cable replacement add $500–$1,500. Budget higher if your panel is in a difficult location or if the utility requires a weatherhead replacement.
All contractors in the Cedar Park network are licensed through TDLR (Texas Dept. of Licensing and Regulation) — verify at tdlr.texas.gov and carry full general liability and workers' compensation insurance. Permits are pulled through the Cedar Park Building Department. Cedar Park experiences severe weather events — hiring a locally-experienced contractor is essential.
Signs You Need Panel Upgrade in Cedar Park, TX
Any of these indicators warrants a call to a licensed Cedar Park electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Breakers that trip repeatedly under normal household loads
- Panel is a Federal Pacific Stab-Lok or Zinsco brand (known fire hazard — replacement strongly advised)
- You're adding a hot tub, EV charger, or major addition and the existing panel has no capacity
- Panel is 60-amp service (homes built before 1970) — modern appliances require 200A minimum
- Scorch marks, burning smell, or discoloration around the panel
- Insurance company has declined coverage or required upgrade as a condition of policy
What Panel Upgrade Includes
Here's what a licensed Cedar Park electrician covers during a typical panel upgrade appointment:
- Load calculation to verify the new panel size (100A, 200A, or 400A) is right for the home
- Pull-down of the old main breaker panel and proper disposal
- Installation of the new service panel with correct breaker sizing and labeling
- New grounding and bonding connections per NEC requirements
- Surge protection device installation (required by NEC 2020)
- City permit application and scheduling of required utility and inspector visit
- Utility coordination for service disconnection and reconnection
- Load test and verification of all circuits before permit close
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Panel Upgrade Works in Cedar Park
What to expect from a licensed Cedar Park electrician from first call to completion.
- 1
Load Calculation
The electrician calculates your home's total load to confirm the right amperage (100A, 200A, or 400A) and identify any circuits that need to be reconfigured.
- 2
Permit Application
A permit is required for all panel work. The electrician submits the permit and schedules both a utility disconnect and a city inspection.
- 3
Panel Replacement
Utility disconnects the service. The old panel is removed, the new service entrance and main breaker are installed, and all circuits are reconnected and labeled.
- 4
Surge Protection & Grounding
A whole-home surge protective device (SPD) is installed as required by NEC 2020. Grounding and bonding are verified and updated.
- 5
Inspection & Sign-Off
The city inspector verifies the installation. Utility reconnects service after the inspection passes. Final load test confirms all circuits are functional.
Panel Upgrade Cost in Cedar Park, TX
Typical price ranges based on Cedar Park, TX market data. Your actual cost depends on project scope and materials.
| Service | Low | High |
|---|---|---|
| 200A panel upgrade (standard) | $1,800 | $3,500 |
| 200A + new service entrance | $3,000 | $5,500 |
| 400A panel (large home or EV+solar) | $4,000 | $8,000 |
| Subpanel addition (100A) | $800 | $2,000 |
| Federal Pacific / Zinsco replacement | $2,500 | $5,000 |
Pricing reflects Cedar Park, TX market rates. Actual cost may vary. Always get a written quote before work begins.
Other Electrical Services in Cedar Park, TX
For Electrical Professionals
Are you an electrical contractor serving Cedar Park?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.