Whole-Home Rewire in Washington, DC
A whole-home rewire in Washington replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in Washington: $6,540–$19,616
- Serving Washington & Washington & Surrounding Areas
- Licensed by State Contractor Licensing Board
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in Washington, DC
A whole-home rewire in Washington replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in Washington costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the Washington network are licensed through State Contractor Licensing Board and carry full general liability and workers' compensation insurance. Permits are pulled through Department of Buildings. Washington experiences high winds and heavy rain — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in Washington, DC
Any of these indicators warrants a call to a licensed Washington electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed Washington electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in Washington
What to expect from a licensed Washington electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in Washington, DC
Electrical work in Washington, DC typically costs more than the national average due to the city's dense urban layout, strict building codes, and high demand for licensed professionals. Most jobs in DC range from $200 to $8,000, depending on complexity and scope. Get quotes from local electricians to see exact pricing for your project.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects Washington, DC market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in Washington, DC
How much does an electrician cost in Washington, DC?
Licensed electricians in Washington charge $75–$150 per hour for labor, plus materials and permit fees. A simple outlet installation runs $150–$300, while a full panel upgrade costs $1,500–$3,500. Most Washington electricians charge a service call fee of $50–$100, waived if you hire them. Get free quotes from ProvenQuote-verified electricians to compare estimates before committing to any job.
Do I need a permit to upgrade my electrical panel in Washington?
Electrical panel upgrades always require a permit in Washington, DC. Contact your local building department to obtain the permit before work begins. Washington's electrical licensing board requires licensed electricians to pull permits and schedule inspections. Unpermitted electrical work voids your home insurance, creates fire hazards, and causes problems when selling your property. Licensed electricians in Washington handle all permits as part of their service.
How much does a 200 amp panel upgrade cost in Washington?
A 200 amp panel upgrade in Washington costs $1,500–$3,500 installed, including the permit, inspection, and utility coordination. This price covers removal of the old panel, installation of new breakers, and final city inspection. You qualify for a 30% federal IRA tax credit up to $600 for eligible panel upgrades. Panel upgrades are necessary for EV chargers, solar systems, and modern home loads. Get free quotes from licensed electricians in Washington to compare final pricing.
How long does EV charger installation take?
Level 2 EV charger installation in Washington takes 2–4 hours for most homes. Check with Pepco (your local utility) for EV charger rebates—many Washington customers receive $500+ rebates. You also qualify for a 30% federal IRA tax credit up to $1,000 through 2032 for EV charger installation. The installation requires a permit from Washington's building department. Licensed electricians in DC handle permitting, installation, and utility coordination as part of the service.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in homes built between 1965–1973 is a fire hazard, according to the U.S. Consumer Product Safety Commission. Many Washington, DC homes from that era contain aluminum wiring in walls and ceilings. Aluminum expands and contracts differently than copper connections, loosening over time and causing fires. Licensed electricians can remediate aluminum wiring by pigtailing individual circuits with copper or performing a full rewire. Have a licensed electrician inspect your Washington home immediately if you suspect aluminum wiring.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in Washington immediately if you notice breakers constantly tripping, burning smells near the panel, insufficient amperage under 200A, defective brands (Zinsco, Federal Pacific, Pushmatic), or panels over 30–40 years old. These warning signs indicate fire risk and inability to power modern appliances and EV chargers. A licensed electrician in Washington can inspect your panel for $150–$300. Get a free estimate from ProvenQuote-verified electricians to determine replacement cost.
Are there rebates for electrical upgrades in Washington, DC?
Washington homeowners qualify for multiple electrical rebates and tax incentives on upgrades. Check Pepco for local EV charger rebates—many DC residents receive $500+ back. The federal IRA provides a 30% tax credit up to $1,000 for EV charger installation and 30% up to $600 for panel upgrades through 2032. HEEHRA assistance helps low-to-moderate income households with electrical upgrades. Licensed electricians in Washington can confirm your eligibility and handle the permit process.
How do I find a licensed electrician in Washington?
Licensed electricians in DC are regulated by Washington's electrical licensing board—verify any electrician's state license number on the official board website. Look for electricians carrying $1M+ liability insurance, active workers' compensation coverage, and clean permit histories. ProvenQuote-verified electricians in Washington meet these standards and provide free quotes for comparison. Check references and ensure your electrician pulls permits before starting work in your DC home.
Other Electrical Services in Washington, DC
For Electrical Professionals
Are you an electrical contractor serving Washington?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.