Whole-Home Rewire in Tampa, FL
A whole-home rewire in Tampa replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in Tampa: $5,210–$15,600
- Serving Tampa & Tampa & Surrounding Areas
- Licensed by State Contractor Licensing Board
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in Tampa, FL
A whole-home rewire in Tampa replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in Tampa costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the Tampa network are licensed through State Contractor Licensing Board and carry full general liability and workers' compensation insurance. Permits are pulled through City of Tampa Department of Construction Services. Tampa experiences hurricane and tropical storms — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in Tampa, FL
Any of these indicators warrants a call to a licensed Tampa electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed Tampa electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in Tampa
What to expect from a licensed Tampa electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in Tampa, FL
Electrical work in Tampa ranges from small repairs to major home upgrades, with costs depending on job complexity and your home's current setup. Labor rates in Tampa run about 4% above the national average due to local market demand and licensing requirements. Get quotes from licensed electricians in your area to compare pricing for your specific project.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects Tampa, FL market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in Tampa, FL
How much does an electrician cost in Tampa, FL?
Licensed electricians in Tampa charge $75–$150 per hour for standard electrical work. A typical service call costs $150–$300, while larger projects like panel upgrades run $1,500–$3,500 and EV charger installation costs $500–$2,000. All pricing includes required permits from Tampa's building department and final inspection. Get free quotes from ProvenQuote-verified electricians to compare pricing on your specific job.
Do I need a permit to upgrade my electrical panel in Tampa?
Electrical panel upgrades always require a permit in Tampa. You must obtain approval from the City of Tampa building department before work begins. Florida's electrical licensing board mandates inspections for all panel work. Unpermitted electrical work voids your homeowner's insurance, creates fire hazards, and causes problems when selling your home. Licensed electricians handle all permit paperwork—never skip this step.
How much does a 200 amp panel upgrade cost in Tampa?
A 200 amp panel upgrade in Tampa costs $1,500–$3,500 installed, including the permit, inspection, and utility coordination with TECO Energy. The price covers removal of your old panel, installation of the new breaker box, and final city inspection. You qualify for a 30% federal IRA tax credit (up to $600) if upgrading to support EV chargers or solar. ProvenQuote connects you with licensed electricians offering free estimates on panel replacements.
How long does EV charger installation take?
Level 2 EV charger installation in Tampa takes 2–4 hours for most homes, though older electrical systems may need upgrades adding 1–2 days. Installation costs $500–$2,000 depending on your panel's capacity. TECO Energy offers EV charger rebates—check their website for current amounts. The federal IRA provides 30% tax credit (up to $1,000) through 2032. A permit is required before installation. Get free quotes from Tampa electricians today.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in Tampa-area homes built between 1965–1973 is a fire hazard, per the U.S. Consumer Product Safety Commission. It oxidizes at connection points, creating dangerous heat buildup. Signs include warm outlets, flickering lights, or burning smells. Remediation options include pigtailing copper leads to outlets or full rewiring. A licensed Florida electrician inspects for $150–$300. Get quotes to fix this fire risk before it becomes dangerous.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in Tampa immediately if breakers trip frequently, you smell burning odors, your home has under 200 amps, or the panel is over 30–40 years old. Defective brands like Zinsco, Federal Pacific, and Pushmatic are fire hazards. A licensed electrician inspection costs $150–$300 and identifies the problem. ProvenQuote-verified electricians provide free panel replacement estimates and handle all Tampa permits required for safe replacement.
Are there rebates for electrical upgrades in Tampa, FL?
Tampa homeowners qualify for multiple electrical rebates and federal tax incentives. TECO Energy offers EV charger rebates—contact them directly. The IRA provides 30% federal tax credits: EV chargers (up to $1,000) and panel upgrades (up to $600) through 2032. HEEHRA grants assist low-to-moderate income households with electrical work costs. ProvenQuote-verified electricians know current rebates and help you claim available credits on your installation.
How do I find a licensed electrician in Tampa?
Licensed electricians in Florida are regulated by your state electrical licensing board—verify any contractor's license number on their website before hiring. Check that they carry $1 million liability insurance and active workers' compensation coverage. Ask about their permit history and recent project examples. ProvenQuote-verified electricians meet all state requirements and pass background checks. Get free quotes from multiple Tampa electricians to compare pricing, experience, and availability today.
Other Electrical Services in Tampa, FL
For Electrical Professionals
Are you an electrical contractor serving Tampa?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.