Whole-Home Rewire in Strathfield, NSW
A whole-home rewire in Strathfield replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in Strathfield: A$8,000–A$25,000
- Serving Strathfield & NSW Region
- Licensed by NSW Fair Trading (contractor licence)
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in Strathfield, NSW
A whole-home rewire in Strathfield replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in Strathfield costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the Strathfield network are licensed through NSW Fair Trading (contractor licence) and carry full general liability and workers' compensation insurance. Permits are pulled through NSW Fair Trading and Strathfield Council. Strathfield experiences strong winds, heavy rainfall, frost, freeze-thaw cycles and flooding — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in Strathfield, NSW
Any of these indicators warrants a call to a licensed Strathfield electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed Strathfield electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in Strathfield
What to expect from a licensed Strathfield electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in Strathfield, NSW
Electrical work in Strathfield ranges widely depending on the job's scope and complexity. Whether you need a switchboard upgrade, new power points, or an EV charger installation, getting quotes from licensed local electricians helps you understand true costs for your home.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects Strathfield, NSW market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in Strathfield, NSW
How much does an electrician cost in Strathfield, NSW?
Licensed electricians in Strathfield charge AUD $75–AUD $150 per hour, with callout fees between AUD $80–AUD $120. Simple jobs like installing outlets cost AUD $200–AUD $400, while rewiring a room runs AUD $1,500–AUD $3,000. All electrical work in Strathfield requires a permit from Strathfield Council, and permit costs (AUD $100–AUD $300) are typically included in your final quote. Get free quotes from ProvenQuote-verified electricians to compare local Strathfield pricing.
Do I need a permit to upgrade my electrical panel in Strathfield?
Electrical panel upgrades always require a permit in Strathfield—this is mandatory under NSW building codes and AS/NZS 3000:2018 Wiring Rules. Strathfield Council issues permits for switchboard work, and only licensed electricians registered with Fair Trading NSW can apply. Unpermitted electrical work voids your home insurance, creates fire hazards, and results in fines up to AUD $2,200. Licensed electricians in Strathfield handle all permit paperwork and inspections as part of their service.
How much does a 200 amp switchboard upgrade cost in Strathfield?
A 200 amp switchboard upgrade in Strathfield costs AUD $1,500–AUD $3,500 installed, including the permit, inspection, and utility coordination. The cost covers removal of your old panel, installation of the new switchboard, and electrical testing to meet AS/NZS 3000:2018 standards. Strathfield homeowners upgrading for solar or EV chargers may qualify for NSW Energy Bill Relief rebates. Licensed electricians in Strathfield will coordinate with Ausgrid to ensure your upgrade meets network requirements.
How long does EV charger installation take?
Level 2 EV charger installation in Strathfield takes 2–4 hours for standard installations, though complex rewiring may extend to a full day. Installation requires a permit from Strathfield Council and inspection by your local utility, Ausgrid. NSW offers state-based EV charger rebates and grants under the federal New Energy Vehicle Strategy—check eligibility for AUD $1,000–AUD $2,000 rebates. ProvenQuote-verified electricians in Strathfield handle permits, utility approvals, and final testing.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in homes built between 1965–1973 is a documented fire hazard due to oxidation and poor connections. Many Strathfield homes built during this era contain aluminum wiring, which corrodes at switch and outlet terminals, causing heat buildup and fire risk. Licensed electricians in Strathfield remediate aluminum wiring by pigtailing copper extensions (AUD $500–AUD $1,200) or rewiring (AUD $3,000–AUD $8,000). Have a Fair Trading NSW–registered electrician inspect your panel immediately.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in Strathfield immediately if you notice frequent breaker trips, burning smells, insufficient capacity (under 200 amps), or defective brands like Zinsco or Federal Pacific. Panels over 30–40 years old fail more often and may not meet AS/NZS 3000:2018 current standards. Licensed electricians in Strathfield perform safety inspections for AUD $150–AUD $300 to diagnose problems. Early detection prevents electrical fires and ensures your home meets modern electrical demands for EV chargers and solar systems.
Are there rebates for electrical upgrades in Strathfield, NSW?
Strathfield homeowners qualify for multiple electrical rebates and incentives. NSW Energy Bill Relief offers AUD $500+ off electrical upgrades; the federal Home Energy Upgrades program covers efficiency work; and solar installations earn Small-scale Technology Certificates (STCs) worth AUD $1,000–AUD $3,500. EV charger installations may attract state rebates up to AUD $2,000 under the federal New Energy Vehicle Strategy. Licensed electricians in Strathfield help you apply for rebates as part of their service—contact ProvenQuote for verified local electricians.
How do I find a licensed electrician in Strathfield?
Licensed electricians in NSW are regulated by Fair Trading NSW and must hold a valid REC (Registered Electrical Contractor) licence. Verify your electrician's license on the Fair Trading NSW database and confirm they carry public liability insurance (minimum AUD $10 million) and workers' compensation. Ask for their NSW Fair Trading registration number, recent job references, and permit history in Strathfield. ProvenQuote-verified electricians are pre-screened, insured, and registered—compare free quotes from local Strathfield professionals instantly.
Other Electrical Services in Strathfield, NSW
For Electrical Professionals
Are you an electrical contractor serving Strathfield?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.