Whole-Home Rewire in Stittsville, ON
A whole-home rewire in Stittsville replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in Stittsville: CA$8,000–CA$25,000
- Serving Stittsville & Stittsville Region
- Licensed by WSIB clearance + municipal building permit
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in Stittsville, ON
A whole-home rewire in Stittsville replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in Stittsville costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the Stittsville network are licensed through WSIB clearance + municipal building permit and carry full general liability and workers' compensation insurance. Permits are pulled through City of Stittsville Building Division. Stittsville experiences heavy snow, ice storms, freeze-thaw cycles, hail and thunderstorms — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in Stittsville, ON
Any of these indicators warrants a call to a licensed Stittsville electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed Stittsville electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in Stittsville
What to expect from a licensed Stittsville electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in Stittsville, ON
Electrical work in Stittsville ranges from simple outlet installations to major panel upgrades, with costs varying based on job complexity and materials needed. Local licensed electricians typically charge by the job or hourly rate, and permit fees from the City of Stittsville Building Division add to your total investment.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects Stittsville, ON market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in Stittsville, ON
How much does an electrician cost in Stittsville, ON?
Licensed electricians in Stittsville charge CAD $75–CAD $150 per hour for service calls, with a typical diagnostic fee of CAD $100–CAD $200. A standard outlet installation runs CAD $150–CAD $300, a light fixture installation costs CAD $200–CAD $400, and a 200 amp panel upgrade ranges from CAD $1,500–CAD $3,500. All pricing includes the required electrical permit, inspection fees, and compliance with the Canadian Electrical Code. Compare free quotes from ProvenQuote-verified electricians in Stittsville to find competitive rates for your specific project.
Do I need a permit to upgrade my electrical panel in Stittsville?
Electrical panel upgrades always require a permit in Stittsville through the City of Ottawa Building Department. ESA-certified electricians in Ontario must pull all permits before work begins—unpermitted electrical work voids your home insurance, creates fire hazards, and prevents you from selling your property. When you hire a licensed electrician through ProvenQuote in Stittsville, the permit cost (typically CAD $150–CAD $300) is included in your estimate. Inspections ensure your upgrade meets the Canadian Electrical Code and protects your family.
How much does a 200 amp electrical panel upgrade cost in Stittsville?
A 200 amp electrical panel upgrade in Stittsville costs CAD $1,500–CAD $3,500 installed, including the permit, inspection, and utility coordination. This upgrade powers EV chargers, solar systems, and modern appliances safely. Stittsville homeowners may qualify for the Canada Greener Homes Loan (interest-free up to CAD $40,000 for energy upgrades) or provincial Ontario Power Authority (OPA) rebates. Get free quotes from ESA-certified electricians in Stittsville—they'll handle all permits and ensure Canadian Electrical Code compliance.
How long does EV charger installation take?
Level 2 EV charger installation in Stittsville takes 2–4 hours for a standard setup, though complex installations may require 6–8 hours. Installation cost ranges from CAD $800–CAD $2,000 depending on electrical panel distance and wiring upgrades. A permit is required for all EV charger installations. Stittsville homeowners qualify for the federal iZEV rebate (up to CAD $5,000 on eligible EVs) and Ontario utility rebates through programs like OPA EV Ready. Licensed electricians in Stittsville will verify your eligibility and handle all permits.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in homes built between 1965–1973 is a fire hazard and creates loose connections that overheat. Many Stittsville homes built in this era contain aluminum wiring. The Canadian Standards Association and product safety research confirm aluminum wiring poses significant fire risk. Remediation requires either pigtailing (copper connections at outlets) or full rewire to modern copper standards. A licensed electrician in Stittsville can inspect for aluminum wiring during a CAD $150–CAD $300 electrical assessment.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in Stittsville immediately if breakers trip repeatedly, you smell burning near the panel, it's over 40 years old, it has defective brands (Zinsco, Federal Pacific, Pushmatic), or you can't add circuits for new appliances. Underperforming panels under 100 amps can't safely power modern homes. A licensed electrician inspection costs CAD $150–CAD $300 and identifies whether your panel is safe. Get a free quote from ProvenQuote-verified electricians in Stittsville for a detailed assessment.
Are there rebates for electrical upgrades in Stittsville, ON?
Stittsville homeowners qualify for multiple electrical rebates and incentives. The Canada Greener Homes Loan provides interest-free financing up to CAD $40,000 for energy-efficient upgrades including panel upgrades and EV chargers. The federal iZEV program offers rebates up to CAD $5,000 on eligible electric vehicles. Ontario Power Authority (OPA) provides utility-specific rebates for EV charger installation and energy upgrades. Licensed electricians in Stittsville verify your eligibility and coordinate incentive applications during project planning.
How do I find a licensed electrician in Stittsville?
Licensed electricians in Ontario are ESA-certified and regulated provincially. Verify credentials by checking the Electrical Safety Authority (ESA) online registry—search the electrician's name and license number. Qualified electricians in Stittsville carry valid ESA certification, liability insurance of at least CAD $1–2 million, and current workers' compensation coverage. ProvenQuote connects you with vetted, licensed electricians in Stittsville who provide free quotes, show permit history, and guarantee Canadian Electrical Code compliance. Compare three estimates before deciding.
Other Electrical Services in Stittsville, ON
For Electrical Professionals
Are you an electrical contractor serving Stittsville?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.