Whole-Home Rewire in St Louis, MO
A whole-home rewire in St Louis replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in St Louis: $5,390–$16,170
- Serving St Louis & St. Louis County
- Licensed by State Contractor Licensing Board
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in St Louis, MO
A whole-home rewire in St Louis replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in St Louis costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the St Louis network are licensed through State Contractor Licensing Board and carry full general liability and workers' compensation insurance. Permits are pulled through City of St. Louis Building Division. St Louis experiences hail and tornadoes — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in St Louis, MO
Any of these indicators warrants a call to a licensed St Louis electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed St Louis electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in St Louis
What to expect from a licensed St Louis electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in St Louis, MO
Electrical work in St. Louis ranges from basic outlet repairs to major panel upgrades and generator installations. Pricing depends on job complexity, materials, and labor. Get quotes from licensed local electricians to compare costs for your specific project in neighborhoods like Clayton, Webster Groves, or Soulard.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects St Louis, MO market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in St Louis, MO
How much does an electrician cost in St. Louis, MO?
Licensed electricians in St. Louis charge $75–$150 per hour for labor, plus material costs and permit fees. A standard outlet installation runs $150–$300, ceiling fan installation costs $200–$400, and a full home rewire ranges $8,000–$15,000. Service calls typically cost $100–$200. All pricing includes the required electrical permit from the St. Louis building department. Get free quotes from ProvenQuote-verified electricians to compare exact pricing for your specific project.
Do I need a permit to upgrade my electrical panel in St. Louis?
Electrical panel upgrades always require a permit in St. Louis, issued by your local building department. Missouri's state electrical licensing board mandates permits for all panel work to ensure safety compliance. Unpermitted electrical work voids home insurance, creates liability issues, and fails home inspections. Licensed electricians in St. Louis handle all permit paperwork and inspections automatically. Never hire unlicensed workers for panel upgrades—the risk far outweighs cost savings. Compare quotes from vetted electricians through ProvenQuote.
How much does a 200 amp panel upgrade cost in St. Louis?
A 200 amp panel upgrade in St. Louis costs $1,500–$3,500 installed, including the permit, inspection, and utility coordination. This covers labor, materials, and all required electrical permits from the St. Louis building department. You qualify for a 30% federal IRA tax credit (up to $600) on panel upgrades through 2032. Panel upgrades are essential for EV chargers, solar systems, and modern home loads. Get free quotes from St. Louis licensed electricians to lock in exact pricing and credit eligibility.
How long does EV charger installation take?
Level 2 EV charger installation in St. Louis takes 2–4 hours for most homes, depending on wiring distance and breaker availability. Installation includes a required electrical permit from the St. Louis building department and inspection. Check with your local utility (Ameren Missouri or local provider) for EV charger rebates—many offer $500–$1,000 discounts. You also qualify for a 30% federal IRA tax credit (up to $1,000) through 2032. Licensed St. Louis electricians handle permits and paperwork automatically.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in homes built between 1965–1973 is a fire hazard, according to U.S. Consumer Product Safety Commission findings. St. Louis and surrounding Midwest homes from this era frequently contain aluminum wiring that oxidizes at connections, causing overheating and fires. Remediation options include pigtailing (connecting copper extensions at outlets and switches for $500–$1,500) or full rewire ($8,000–$15,000). Licensed St. Louis electricians can inspect your home and recommend the safest, most cost-effective solution.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in St. Louis immediately if you notice frequently tripping breakers, a burning smell, undersized 100–150 amp service, or defective brands (Zinsco, Federal Pacific, Pushmatic). Panels over 30–40 years old also warrant replacement. A licensed electrician inspection costs $150–$300 in St. Louis. Upgrade costs run $1,500–$3,500 and qualify for 30% IRA federal tax credits (up to $600). Get free quotes from ProvenQuote-verified electricians to assess your panel's condition.
Are there rebates for electrical upgrades in St. Louis, MO?
St. Louis homeowners qualify for multiple electrical rebates and tax incentives. Check with Ameren Missouri or your local utility for EV charger rebates ($500–$1,000). Federal IRA tax credits include 30% for EV charger installation (up to $1,000 through 2032) and 30% for panel upgrades (up to $600 through 2032). HEEHRA grants support low-to-moderate income households for efficiency upgrades. Missouri electricians on ProvenQuote verify your eligibility and integrate credits into quotes automatically.
How do I find a licensed electrician in St. Louis?
Licensed electricians in Missouri are regulated by your state electrical licensing board—verify any electrician's license on the Missouri Division of Professional Regulation website. Confirm they carry $1M+ liability insurance, workers' compensation coverage, and a clean permit history with the St. Louis building department. ProvenQuote-verified electricians meet all licensing, insurance, and background requirements. Compare free quotes, read customer reviews, and request references before hiring. Licensed professionals guarantee code-compliant work and handle all permits automatically.
Other Electrical Services in St Louis, MO
For Electrical Professionals
Are you an electrical contractor serving St Louis?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.