Whole-Home Rewire in Saint Leonard, QC
A whole-home rewire in Saint Leonard replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in Saint Leonard: CA$8,000–CA$25,000
- Serving Saint Leonard & Saint-Leonard Region
- Licensed by RBQ (Régie du bâtiment du Québec)
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in Saint Leonard, QC
A whole-home rewire in Saint Leonard replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in Saint Leonard costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the Saint Leonard network are licensed through RBQ (Régie du bâtiment du Québec) and carry full general liability and workers' compensation insurance. Permits are pulled through Ville de Saint-Leonard - Service de l'urbanisme. Saint Leonard experiences heavy snow, ice storms, freeze-thaw cycles, hail and thunderstorms — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in Saint Leonard, QC
Any of these indicators warrants a call to a licensed Saint Leonard electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed Saint Leonard electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in Saint Leonard
What to expect from a licensed Saint Leonard electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in Saint Leonard, QC
Electrical work in Saint-Leonard ranges from simple outlet installations to major panel upgrades, with costs depending on job complexity and permit requirements. Getting quotes from multiple licensed electricians helps you compare pricing and understand what's included in each estimate.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects Saint Leonard, QC market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in Saint Leonard, QC
How much does an electrician cost in Saint-Leonard, QC?
Licensed electricians in Saint-Leonard charge CAD $75–CAD $150 per hour for service calls, inspections, and repairs. A basic outlet installation runs CAD $150–CAD $300, while a full panel inspection costs CAD $200–CAD $350. All electrical work in Saint-Leonard requires a permit, which adds CAD $50–CAD $200 to the final bill depending on job complexity. ProvenQuote-verified electricians in Saint-Leonard include permit costs in their quotes, so you know the total price upfront before work begins.
Do I need a permit to upgrade my electrical panel in Saint-Leonard?
Electrical panel upgrades always require a permit in Saint-Leonard under Quebec building code and Canadian Electrical Code (CEC) standards. The local building department (Ville de Montréal) issues permits for all panel work. Provincially licensed electricians—CCQ-regulated in Quebec—must pull the permit before starting work. Unpermitted electrical work voids your home insurance, creates fire hazards, and causes problems when you sell. Licensed electricians in Saint-Leonard handle all permitting and inspection coordination for you.
How much does a 200 amp electrical panel upgrade cost in Saint-Leonard?
A 200 amp electrical panel upgrade in Saint-Leonard costs CAD $1,500–CAD $3,500 installed, including permit, inspection, and utility coordination with Hydro-Québec. Upgrades are essential for EV charger installation, solar systems, or modern home loads. Saint-Leonard homeowners may qualify for the Canada Greener Homes Loan (interest-free up to CAD $40,000 for energy upgrades) or provincial rebates through Hydro-Québec. A CCQ-licensed electrician in Saint-Leonard will assess your current panel, coordinate with your utility, and handle all permitting.
How long does EV charger installation take?
Level 2 EV charger installation in Saint-Leonard takes 2–4 hours for standard wiring runs under 30 feet. If your electrical panel requires an upgrade first, add 4–8 hours and budget CAD $1,500–CAD $3,500 for that work. Saint-Leonard homeowners qualify for the federal iZEV program (CAD $5,000 rebate on eligible EVs) and Hydro-Québec EV-ready rebates. All EV charger wiring requires a permit under Canadian Electrical Code (CEC) standards. Get free quotes from licensed electricians in Saint-Leonard to compare timelines and total costs.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in homes built between 1965–1973 is a fire hazard and a major safety concern. Many Saint-Leonard homes from that era contain aluminum wiring, which oxidizes over time, causing loose connections that overheat and spark fires. Licensed electricians in Saint-Leonard can remediate aluminum wiring by pigtailing individual outlets (CAD $200–CAD $400 per circuit) or full rewiring (CAD $3,000–CAD $8,000). Have a CCQ-licensed electrician inspect your home's wiring if it was built during that period to confirm safety.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in Saint-Leonard immediately if you notice breakers tripping repeatedly, burning smells near the panel, flickering lights, or active power below 200 amps. Defective brands like Zinsco, Federal Pacific, and Pushmatic panels are fire hazards and must be replaced. Panels over 30–40 years old commonly fail. A licensed electrician inspection in Saint-Leonard costs CAD $150–CAD $300 and identifies whether your panel is safe or needs replacement. Schedule an assessment with a CCQ-licensed electrician today.
Are there rebates for electrical upgrades in Saint-Leonard, QC?
Saint-Leonard homeowners qualify for multiple electrical rebates and incentives. The Canada Greener Homes Loan provides interest-free financing up to CAD $40,000 for energy upgrades including panel replacements and EV chargers. The federal iZEV program offers up to CAD $5,000 for eligible electric vehicle purchases. Hydro-Québec provides EV-ready home rebates and heat pump incentives. Saint-Leonard residents should check with Hydro-Québec directly for current rebate amounts and eligibility. Licensed electricians in Saint-Leonard can help you apply for available incentives.
How do I find a licensed electrician in Saint-Leonard?
Licensed electricians in Quebec are regulated by the Commission de la construction du Québec (CCQ) and must carry a valid license card. Verify a Saint-Leonard electrician's CCQ license on the official website before hiring. Check that they carry liability insurance, workers' compensation coverage, and have a clean permit history with the Ville de Montréal. ProvenQuote verifies all electricians in Saint-Leonard—confirming licenses, insurance, and customer reviews. Use ProvenQuote to get free quotes from vetted, licensed electricians in your area and compare pricing instantly.
Other Electrical Services in Saint Leonard, QC
For Electrical Professionals
Are you an electrical contractor serving Saint Leonard?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.