Whole-Home Rewire in Rouge, ON

A whole-home rewire in Rouge replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.

Typical whole-home rewire costs in Rouge: CA$8,000–CA$25,000

  • Serving Rouge & Rouge Region
  • Licensed by WSIB clearance + municipal building permit
  • Free Estimates
  • Response in <2 Hours
Get a Free Whole-Home Rewire Estimate in Rouge

Whole-Home Rewire in Rouge, ON

A whole-home rewire in Rouge replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.

A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.

Whole-home rewiring in Rouge costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.

All contractors in the Rouge network are licensed through WSIB clearance + municipal building permit and carry full general liability and workers' compensation insurance. Permits are pulled through City of Rouge Building Division. Rouge experiences heavy snow, ice storms, freeze-thaw cycles, hail and thunderstorms — hiring a locally-experienced contractor is essential.

Get My Free Whole-Home Rewire Quote →

Signs You Need Whole-Home Rewire in Rouge, ON

Any of these indicators warrants a call to a licensed Rouge electrician. Electrical hazards are the leading cause of residential fires — don't delay.

  • Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
  • Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
  • Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
  • Insurance company has refused or surcharged due to outdated wiring type
  • Flickering lights throughout the home not explained by a loose fixture
  • Burning smell but no identifiable source

What Whole-Home Rewire Includes

Here's what a licensed Rouge electrician covers during a typical whole-home rewire appointment:

  • Whole-home assessment and written scope of work with permit application
  • Old wiring removal (knob-and-tube or aluminum branch circuit)
  • New copper wiring installation to all circuits throughout the home
  • Panel upgrade if needed (included in most full rewires)
  • AFCI and GFCI protection on all circuits per current NEC code
  • City inspection at multiple phases: rough-in, service change, final
  • Drywall repair coordination (separate contractor typically)
  • Final load test and inspection sign-off

Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.

How Whole-Home Rewire Works in Rouge

What to expect from a licensed Rouge electrician from first call to completion.

  1. 1

    Scope & Permit

    Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.

  2. 2

    Rough-In Wiring

    New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.

  3. 3

    Panel Work

    New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.

  4. 4

    Device & Fixture Installation

    Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.

  5. 5

    Final Inspection & Sign-Off

    City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.

Whole-Home Rewire Cost in Rouge, ON

Electrical work in Rouge, Ontario typically ranges from CAD 300 to CAD 10,000 depending on the scope of your project. Whether you need a panel upgrade before winter storms or an EV charger installed for your new vehicle, local licensed electricians can provide detailed quotes based on your home's specific needs.

ServiceLowHigh
1,000-1,500 sq ft home rewire$8,000$15,000
1,500-2,500 sq ft home rewire$12,000$22,000
2,500-4,000 sq ft home rewire$20,000$35,000
Knob-and-tube remediation only (partial)$5,000$12,000
Aluminum branch circuit remediation$3,000$8,000

Pricing reflects Rouge, ON market rates. Actual cost may vary. Always get a written quote before work begins.

Frequently Asked Questions About Whole-Home Rewire in Rouge, ON

How much does an electrician cost in Rouge, ON?

Licensed electricians in Rouge charge CAD $75–CAD $150 per hour for service calls, diagnostics, and installations. A standard outlet installation costs CAD $150–CAD $300, a ceiling fan install runs CAD $200–CAD $400, and a full kitchen rewire ranges from CAD $2,000–CAD $5,000. All pricing includes the required electrical permit issued by your local building department and inspection fees. Get free quotes from ESA-certified electricians in Rouge to compare exact costs for your project.

Do I need a permit to upgrade my electrical panel in Rouge?

Electrical panel upgrades always require a permit in Rouge, Ontario. Your local building department issues permits for all panel work, and ESA-certified licensed electricians must pull them before starting. Unpermitted electrical work voids your home insurance, creates fire hazards, and fails home inspections when you sell. The permit costs CAD $100–CAD $300 and includes mandatory inspections to ensure your upgrade meets the Canadian Electrical Code (CEC). Never hire unlicensed work in Rouge—always verify your electrician's ESA certification.

How much does a 200 amp electrical panel upgrade cost in Rouge?

A 200 amp electrical panel upgrade in Rouge costs CAD $1,500–CAD $3,500 installed, including the permit, inspection, and coordination with your local utility. This upgrade is essential if you're adding an EV charger, solar panels, or modern heating systems that exceed your current 100–150 amp service. Ontario homeowners may qualify for the Canada Greener Homes Loan (interest-free up to CAD $40,000 for energy upgrades) or OPA rebates. Compare licensed electrician quotes in Rouge to lock in the best price for your panel upgrade.

How long does EV charger installation take?

Level 2 EV charger installation in Rouge takes 2–4 hours if your electrical panel has available capacity and the charger is located near your panel. Installation costs CAD $800–CAD $2,000 total. You qualify for the federal iZEV program (up to CAD $5,000 rebate on eligible EVs) and Ontario provincial utility rebates through OPA for charger equipment and labor. A permit is required in Rouge before installation begins. Get free quotes from licensed electricians to confirm your home's readiness and final charger cost.

What is aluminum wiring and is it dangerous?

Aluminum branch circuit wiring installed in Rouge homes built between 1965–1973 is a fire hazard. This metal expands and contracts differently than copper, loosening connections and creating heat buildup that ignites insulation. Licensed electricians in Rouge can remediate aluminum wiring by pigtailing (connecting copper extensions to outlets) for CAD $800–CAD $2,000 or performing a full rewire for CAD $5,000–CAD $12,000. Get a professional inspection if your home was built during this era—remediation protects your family and passes inspections.

How do I know if my electrical panel needs to be replaced?

Replace your electrical panel in Rouge immediately if you notice frequent breaker trips, burning smells near the panel, flickering lights, or undersized service (under 200 amps). Defective brands like Zinsco, Federal Pacific, and Pushmatic are fire hazards and must be replaced. Panels older than 30–40 years typically fail. A licensed electrician inspection in Rouge costs CAD $150–CAD $300 and identifies whether replacement is urgent. Contact ProvenQuote-verified electricians to schedule a free panel assessment today.

Are there rebates for electrical upgrades in Rouge, ON?

Rouge homeowners qualify for multiple electrical rebates and incentives. The Canada Greener Homes Loan offers interest-free financing up to CAD $40,000 for energy upgrades including panel replacements and EV chargers. Ontario's OPA provides utility rebates for EV charger installation (CAD $500–CAD $1,500) and the federal iZEV program covers up to CAD $5,000 on eligible electric vehicles. Energy audits through the Greener Homes grant cover up to CAD $600. Licensed electricians in Rouge can guide you through rebate applications—compare quotes to maximize savings.

How do I find a licensed electrician in Rouge?

Licensed electricians in Ontario are ESA-certified and regulated by provincial authorities. Verify your electrician's license through the ESA website before hiring. Look for valid ESA certification, adequate liability insurance (minimum CAD $2 million), active workers' compensation coverage, and a clean permit history with your local building department. ProvenQuote-verified electricians in Rouge meet all these standards and provide free quotes for comparison. Never hire unlicensed workers—your safety and home insurance depend on certified, permitted electrical work.

For Electrical Professionals

Are you an electrical contractor serving Rouge?

ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.

Get Your Free Electrical Quote

Connect with a licensed local professional in Rouge, ON. No obligation.

1
2

Step 1 of 2Service

What do you need? *

How soon do you need it? *