Whole-Home Rewire in Parc Extension, QC
A whole-home rewire in Parc Extension replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in Parc Extension: CA$8,000–CA$25,000
- Serving Parc Extension & Parc-Extension Region
- Licensed by RBQ (Régie du bâtiment du Québec)
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in Parc Extension, QC
A whole-home rewire in Parc Extension replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in Parc Extension costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the Parc Extension network are licensed through RBQ (Régie du bâtiment du Québec) and carry full general liability and workers' compensation insurance. Permits are pulled through Ville de Parc-Extension - Service de l'urbanisme. Parc Extension experiences heavy snow, ice storms, freeze-thaw cycles, hail and thunderstorms — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in Parc Extension, QC
Any of these indicators warrants a call to a licensed Parc Extension electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed Parc Extension electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in Parc Extension
What to expect from a licensed Parc Extension electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in Parc Extension, QC
Electrical work in Parc-Extension typically ranges from CAD 300 to CAD 10,000 per job, depending on the scope and complexity. Labor costs in the region track at the national average, making local electricians competitively priced compared to nearby areas. Get quotes from licensed electricians to understand the full cost for your specific project.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects Parc Extension, QC market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in Parc Extension, QC
How much does an electrician cost in Parc-Extension, QC?
Licensed electricians in Parc-Extension charge CAD $75–CAD $150 per hour for service calls and installations. A basic outlet installation runs CAD $150–CAD $300, while a full panel upgrade costs CAD $1,500–CAD $3,500 installed. All pricing includes the required electrical permit and inspection by Hydro-Québec or your local building authority. Get free quotes from ProvenQuote-verified electricians in Parc-Extension to compare rates before you commit.
Do I need a permit to upgrade my electrical panel in Parc-Extension?
Electrical panel upgrades always require a permit in Parc-Extension through the local building department and Hydro-Québec. Only CCQ-regulated electricians in Québec can obtain permits legally. Unpermitted electrical work voids your home insurance, creates fire hazards, and blocks future sales. The permit fee runs CAD $100–CAD $300. Licensed electricians in Parc-Extension handle all permit paperwork and inspections as part of their service.
How much does a 200 amp electrical panel upgrade cost in Parc-Extension?
A 200 amp electrical panel upgrade in Parc-Extension costs CAD $1,500–CAD $3,500 installed, including permit, inspection, and utility coordination. You need this upgrade to power Level 2 EV chargers, solar systems, or modern heating loads. Parc-Extension homeowners may qualify for the Canada Greener Homes Loan (interest-free up to CAD $40,000 for energy upgrades). Compare free estimates from ProvenQuote-verified electricians to lock in the best price and timeline.
How long does EV charger installation take?
Level 2 EV charger installation in Parc-Extension takes 2–4 hours for wiring, disconnect, and mounting. Installation costs CAD $800–CAD $2,000 depending on distance from your panel. Your local utility may offer rebates—check Hydro-Québec's EV programs or the federal iZEV rebate (up to CAD $5,000 on eligible EVs). A permit is required before work begins. Licensed electricians in Parc-Extension handle all permits and coordinate with your utility.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in Parc-Extension homes built between 1965–1973 is a fire hazard. The U.S. Consumer Product Safety Commission linked it to house fires due to corrosion at connection points. Remediation options include pigtailing (copper jumpers at outlets) or full rewiring. Aluminum wiring was common in Humid Continental region homes of that era, including Parc-Extension. Licensed electricians inspect and repair aluminum wiring for CAD $200–CAD $800 per circuit.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in Parc-Extension immediately if you notice breakers tripping constantly, a burning smell near the panel, fewer than 200 amps available, or defective brands (Zinsco, Federal Pacific, Pushmatic). Panels over 30–40 years old degrade and cannot handle modern loads safely. A licensed electrician inspection costs CAD $150–CAD $300. ProvenQuote-verified electricians in Parc-Extension provide free replacement estimates after inspection.
Are there rebates for electrical upgrades in Parc-Extension, QC?
Parc-Extension homeowners qualify for multiple electrical rebates and incentives. The Canada Greener Homes Loan provides interest-free loans up to CAD $40,000 for energy upgrades including panel work and EV chargers. Hydro-Québec offers utility rebates for energy-efficient upgrades. The federal iZEV program rebates up to CAD $5,000 on eligible EVs with home charging. Licensed electricians in Parc-Extension help you identify rebate-eligible work before installation begins.
How do I find a licensed electrician in Parc-Extension?
Licensed electricians in Québec are regulated by CCQ (Commission de la construction du Québec). Verify credentials by checking the electrician's valid CCQ license and liability insurance before hiring. Ask for their permit history and workers' compensation coverage. ProvenQuote-verified electricians in Parc-Extension pass background checks, insurance verification, and license validation. Compare free quotes from multiple licensed electricians using ProvenQuote's marketplace to find the best fit for your project.
Other Electrical Services in Parc Extension, QC
For Electrical Professionals
Are you an electrical contractor serving Parc Extension?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.