Whole-Home Rewire in New Orleans, LA
A whole-home rewire in New Orleans replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in New Orleans: $5,367–$16,102
- Serving New Orleans & New Orleans & Surrounding Areas
- Licensed by State Contractor Licensing Board
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in New Orleans, LA
A whole-home rewire in New Orleans replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in New Orleans costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the New Orleans network are licensed through State Contractor Licensing Board and carry full general liability and workers' compensation insurance. Permits are pulled through City of New Orleans Department of Safety and Permits. New Orleans experiences hurricane and tropical storms — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in New Orleans, LA
Any of these indicators warrants a call to a licensed New Orleans electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed New Orleans electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in New Orleans
What to expect from a licensed New Orleans electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in New Orleans, LA
Electrical work in New Orleans reflects the city's unique climate challenges and specialized labor market. Prices below represent typical ranges for licensed electricians serving the greater New Orleans area. Your actual cost depends on the complexity of your job, your home's age, and local permit requirements from the City of New Orleans Department of Safety and Permits.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects New Orleans, LA market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in New Orleans, LA
How much does an electrician cost in New Orleans, LA?
Licensed electricians in New Orleans charge $80–$125 per hour for service calls, plus parts and materials. A standard outlet installation runs $150–$300, ceiling fan installation costs $200–$400, and a full home rewire ranges from $8,000–$15,000. All pricing includes the required electrical permit from the City of New Orleans and inspection fees. Get free quotes from ProvenQuote-verified electricians to compare exact costs for your specific job before any work begins.
Do I need a permit to upgrade my electrical panel in New Orleans?
Electrical panel upgrades always require a permit in New Orleans through the City's Building Department. Your licensed electrician must pull the permit before starting work—it's non-negotiable. The contractor must hold a valid Electrical Subcontractor License from Louisiana State Licensing Board for Contractors (LSLBC); verify at lslbc.louisiana.gov. Unpermitted work voids your homeowner's insurance, creates liability in a fire, and prevents home sale. ProvenQuote-verified electricians handle all permits and inspections as part of their service.
How much does a 200 amp panel upgrade cost in New Orleans?
A 200 amp panel upgrade in New Orleans costs $1,800–$3,500 installed, including the permit, inspection, and utility coordination with Entergy New Orleans. This covers the new breaker panel, disconnect switch, and labor. You qualify for a 30% federal tax credit (up to $600) under the Inflation Reduction Act if you're upgrading for solar or modernizing an older home. Panel upgrades are essential for EV charger installation and handling modern electrical loads. ProvenQuote connects you with licensed electricians who manage the entire process.
How long does EV charger installation take?
Level 2 EV charger installation in New Orleans takes 2–4 hours for most homes with existing 200A service. Installation requires a permit from the City, coordination with Entergy New Orleans, and inspection. Federal IRA credits cover 30% of the charger cost (up to $1,000) through 2032. Entergy offers rebate programs for qualifying EV charger installations. ProvenQuote-verified electricians in New Orleans handle permits, utility coordination, and paperwork to maximize your tax credit eligibility.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in New Orleans homes built between 1965–1973 is a fire hazard, according to U.S. Consumer Product Safety Commission findings. Aluminum expands and contracts at different rates than copper, creating loose connections that overheat and spark fires. You have two remediation options: pigtailing (copper connections at outlets) or full rewire to copper. Have a licensed electrician in New Orleans inspect your panel immediately if your home is from that era. ProvenQuote connects you with electricians who specialize in aluminum wiring remediation.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in New Orleans immediately if you notice circuit breakers frequently tripping, burning smells near the panel, service under 200 amps, or a defective brand (Zinsco, Federal Pacific, Pushmatic). Panels over 30–40 years old also warrant replacement due to wear and outdated safety standards. A licensed electrician inspection costs $150–$300 and identifies whether your panel is safe. ProvenQuote-verified electricians in New Orleans offer free consultations to assess your panel's condition and provide upgrade estimates.
Are there rebates for electrical upgrades in New Orleans, LA?
New Orleans homeowners qualify for multiple electrical rebates and federal tax incentives. The Inflation Reduction Act offers 30% credits: up to $1,000 for EV charger installation and up to $600 for panel upgrades. Entergy New Orleans runs EV charger rebate programs. The Home Energy Efficiency Rebate Act (HEEHRA) provides additional assistance for low-to-moderate income households upgrading insulation and HVAC. Panel upgrades for solar installations also qualify. ProvenQuote-verified electricians help you navigate all available incentives and maximize your savings.
How do I find a licensed electrician in New Orleans?
Licensed electricians in Louisiana hold an Electrical Subcontractor License from Louisiana State Licensing Board for Contractors (LSLBC); verify any contractor at lslbc.louisiana.gov before hiring. Confirm they carry $1M+ liability insurance and active workers' compensation. Ask for their permit history and references in New Orleans. ProvenQuote-verified electricians meet all LSLBC requirements, carry proper insurance, and handle all permitting transparently. Compare estimates from multiple qualified electricians in your area using ProvenQuote's free quote tool.
Other Electrical Services in New Orleans, LA
For Electrical Professionals
Are you an electrical contractor serving New Orleans?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.