Whole-Home Rewire in Mirabel, QC
A whole-home rewire in Mirabel replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in Mirabel: CA$8,000–CA$25,000
- Serving Mirabel & Mirabel Region
- Licensed by RBQ (Régie du bâtiment du Québec)
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in Mirabel, QC
A whole-home rewire in Mirabel replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in Mirabel costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the Mirabel network are licensed through RBQ (Régie du bâtiment du Québec) and carry full general liability and workers' compensation insurance. Permits are pulled through Ville de Mirabel - Service de l'urbanisme. Mirabel experiences heavy snow, ice storms, freeze-thaw cycles, hail and thunderstorms — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in Mirabel, QC
Any of these indicators warrants a call to a licensed Mirabel electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed Mirabel electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in Mirabel
What to expect from a licensed Mirabel electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in Mirabel, QC
Electrical work in Mirabel ranges from simple outlet installations to major panel upgrades, with costs depending on job complexity, permit requirements, and local labor availability. Most homeowners in the Mirabel region can expect to invest between CAD 300 and CAD 10,000 for residential electrical projects. Get quotes from multiple licensed electricians to compare pricing for your specific needs.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects Mirabel, QC market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in Mirabel, QC
How much does an electrician cost in Mirabel, QC?
Licensed electricians in Mirabel charge CAD $75–CAD $150 per hour for service calls and repairs. A basic outlet installation costs CAD $150–CAD $300, while a full electrical panel upgrade ranges from CAD $1,500–CAD $3,500. All pricing includes the required electrical permit and inspection by Hydro-Québec or your local authority. Emergency after-hours calls may cost CAD $200–CAD $300 extra. Compare free quotes from ProvenQuote-verified electricians in Mirabel to find transparent pricing for your specific project.
Do I need a permit to upgrade my electrical panel in Mirabel?
Electrical panel upgrades always require a permit in Mirabel—this is mandatory under the Canadian Electrical Code (CEC). The Mirabel building department and Hydro-Québec must inspect the work before energization. Only provincially licensed electricians (CCQ-regulated in Québec) can legally perform this work. Unpermitted electrical work voids your home insurance, creates fire hazards, and blocks future home sales. Licensed electricians in Mirabel handle all permit filing automatically as part of the job.
How much does a 200 amp electrical panel upgrade cost in Mirabel?
A 200 amp electrical panel upgrade in Mirabel costs CAD $1,500–CAD $3,500 installed, including permit, inspection, and utility coordination with Hydro-Québec. This investment supports EV charger installation, solar systems, or modern household loads. Mirabel homeowners qualify for the Canada Greener Homes Loan—an interest-free federal loan up to CAD $40,000 for energy upgrades. Get free quotes from licensed electricians in Mirabel to confirm pricing and explore available rebates for your specific electrical needs.
How long does EV charger installation take?
Level 2 EV charger installation in Mirabel takes 2–4 hours for a new dedicated circuit with permit and inspection. Installation costs CAD $800–CAD $1,500 depending on circuit distance and electrical panel capacity. A permit is required under the Canadian Electrical Code (CEC). Mirabel homeowners can claim up to CAD $5,000 through the federal iZEV rebate program, plus check Hydro-Québec for provincial EV charging rebates. Licensed electricians in Mirabel handle all permits and coordinate with your local utility.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in homes built between 1965–1973 is a fire hazard due to oxidation and poor conductivity. Many Mirabel homes from this era contain aluminum wiring, which increases fire risk significantly. Remediation options include pigtailing (copper connectors at outlets) or full rewire with copper cable to meet Canadian Electrical Code standards. A licensed electrician inspection costs CAD $150–CAD $300. Never ignore aluminum wiring—contact ProvenQuote-verified electricians in Mirabel for immediate assessment.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in Mirabel immediately if you notice frequent breaker tripping, burning smells, flickering lights, or panel age exceeding 30–40 years. Defective brands like Zinsco and Federal Pacific are safety hazards. A panel under 200 amps cannot support modern loads like EV chargers or heating systems. A licensed electrician inspection in Mirabel costs CAD $150–CAD $300 and identifies whether replacement is urgent. Get free quotes from ProvenQuote-verified electricians to confirm your panel's condition.
Are there rebates for electrical upgrades in Mirabel, QC?
Mirabel homeowners qualify for multiple electrical rebates and incentives. The Canada Greener Homes Loan offers an interest-free federal loan up to CAD $40,000 for energy-efficient upgrades. The federal iZEV program provides up to CAD $5,000 rebates on eligible electric vehicles and charging installation. Hydro-Québec administers provincial utility rebates for EV chargers and energy-efficient electrical work. Licensed electricians in Mirabel verify your eligibility and coordinate rebate claims. Compare free quotes to identify which incentives apply to your electrical project.
How do I find a licensed electrician in Mirabel?
Licensed electricians in Québec are regulated by the Commission de la Construction du Québec (CCQ) and must hold a valid provincial license. Verify any Mirabel electrician's CCQ credentials online before hiring. Confirm adequate liability insurance, workers' compensation coverage, and a clean permit history with the local building authority. ProvenQuote connects you with vetted, CCQ-licensed electricians in Mirabel who provide transparent quotes, handle all permits, and meet Canadian Electrical Code standards. Get free, no-obligation quotes to compare qualified professionals today.
Other Electrical Services in Mirabel, QC
For Electrical Professionals
Are you an electrical contractor serving Mirabel?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.