Whole-Home Rewire in Miami, FL
A whole-home rewire in Miami replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in Miami: $5,385–$16,160
- Serving Miami & Miami & Surrounding Areas
- Licensed by State Contractor Licensing Board
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in Miami, FL
A whole-home rewire in Miami replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in Miami costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the Miami network are licensed through State Contractor Licensing Board and carry full general liability and workers' compensation insurance. Permits are pulled through City of Miami Department of Regulatory and Economic Resources. Miami experiences hurricane and tropical storms — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in Miami, FL
Any of these indicators warrants a call to a licensed Miami electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed Miami electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in Miami
What to expect from a licensed Miami electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in Miami, FL
Electrical work in Miami ranges widely depending on the scope and complexity of your project. Whether you need a simple outlet installation or a major panel upgrade, getting quotes from local electricians helps you understand what your job will cost. Miami's tropical climate and building codes affect pricing for services like GFCI outlets and weatherproof installations.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects Miami, FL market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in Miami, FL
How much does an electrician cost in Miami, FL?
Licensed electricians in Miami charge $75–$150 per hour for service calls, diagnostics, and repairs. A simple outlet installation runs $150–$300, ceiling fan installation costs $200–$400, and electrical panel upgrades range from $1,500–$3,500 installed. All pricing includes the required permit from Miami-Dade County Building Department and inspection fees. Get free quotes from ProvenQuote-verified electricians in Miami to compare exact pricing for your job.
Do I need a permit to upgrade my electrical panel in Miami?
Electrical panel upgrades always require a permit in Miami—upgrading without one is illegal. The Miami-Dade County Building Department issues permits, and your licensed electrician must pull it before work begins. Florida's electrical licensing board enforces the code. Unpermitted work creates liability for fires, insurance claim denial, and failed home sales inspections. Permits cost $50–$200 and protect you legally. Compare licensed electricians in Miami who handle all permitting.
How much does a 200 amp panel upgrade cost in Miami?
A 200 amp panel upgrade in Miami costs $1,500–$3,500 installed, including labor, materials, the required permit, inspection, and utility coordination. The work typically takes one day. You qualify for a 30% federal IRA tax credit (up to $600) if your upgrade supports solar or heat pump installation. Panel upgrades are necessary for EV chargers, solar systems, and modern appliance loads. Get free quotes from Miami electricians who verify your tax credit eligibility.
How long does EV charger installation take?
Level 2 EV charger installation in Miami takes 2–4 hours for a standard 240-volt home installation. The work requires a permit from Miami-Dade County—your licensed electrician handles all paperwork. Check with FPL (Florida Power & Light) for available EV charger rebates. You qualify for a 30% federal IRA tax credit (up to $1,000) through 2032 on charger equipment and installation costs. ProvenQuote-verified electricians in Miami provide upfront pricing and credit eligibility details.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in Miami-area homes built between 1965–1973 is a documented fire hazard by the U.S. Consumer Product Safety Commission. Aluminum expands and contracts with temperature changes, loosening connections and creating heat at outlets and switches. Remediation options include pigtailing (connecting copper wires to aluminum with special connectors at outlets) for $300–$800, or full rewiring ($2,000–$5,000). Licensed electricians in Miami inspect for aluminum wiring free during panel evaluations.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in Miami immediately if breakers trip repeatedly, you smell burning near the panel, you have fewer than 200 amps, the panel exceeds 30–40 years old, or it's a defective brand (Zinsco, Federal Pacific, Pushmatic). These are fire hazards. A licensed electrician inspection in Miami costs $150–$300 and identifies problems requiring replacement. Most panels need replacement every 25–40 years. Get a free quote from ProvenQuote-verified Miami electricians for a professional assessment.
Are there rebates for electrical upgrades in Miami, FL?
Miami homeowners qualify for multiple electrical rebates and tax incentives. FPL (Florida Power & Light) offers EV charger rebates—check their website for current amounts. The federal IRA provides a 30% tax credit up to $1,000 for EV charger installation and up to $600 for electrical panel upgrades qualifying for solar/heat pump support. HEEHRA assistance is available for low-to-moderate income households in Florida. ProvenQuote-verified Miami electricians verify your eligibility and include rebates in quotes.
How do I find a licensed electrician in Miami?
Licensed electricians in Florida are regulated by the Florida Department of Business and Professional Regulation. Verify any electrician's active state license number on their website before hiring. Look for proof of $1M+ liability insurance, workers' compensation, and a permit history with Miami-Dade County. ProvenQuote connects you with pre-verified Miami electricians who meet all licensing and insurance requirements. Get free quotes, compare estimates, and hire with confidence through our marketplace.
Other Electrical Services in Miami, FL
For Electrical Professionals
Are you an electrical contractor serving Miami?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.