Whole-Home Rewire in Houston, TX
A whole-home rewire in Houston replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in Houston: $4,537–$13,614
- Serving Houston & Houston & Surrounding Areas
- Licensed by State Contractor Licensing Board
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in Houston, TX
A whole-home rewire in Houston replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in Houston costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the Houston network are licensed through State Contractor Licensing Board and carry full general liability and workers' compensation insurance. Permits are pulled through City of Houston Development Services Department. Houston experiences hail, hurricane, tropical storms and tornadoes — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in Houston, TX
Any of these indicators warrants a call to a licensed Houston electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed Houston electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in Houston
What to expect from a licensed Houston electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in Houston, TX
Electrical work in Houston ranges widely depending on the scope of your project. Whether you need a simple outlet repair or a full panel upgrade, local electricians in the Houston area typically charge between $200 and $8,000 per job. Get quotes from licensed professionals to see exact pricing for your specific needs.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects Houston, TX market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in Houston, TX
How much does an electrician cost in Houston, TX?
Licensed electricians in Houston charge $80–$125 per hour for most service calls. A simple outlet installation runs $150–$300, while a full home rewire costs $8,000–$15,000. Circuit breaker replacement averages $300–$800 per breaker. All pricing includes the required electrical permit and inspection fees mandated by Houston's building department. Get free quotes from ProvenQuote-verified electricians to compare estimates for your specific job.
Do I need a permit to upgrade my electrical panel in Houston?
Electrical panel upgrades always require a permit in Houston — your local building department issues these. Licensed electricians verify the electrician's TDLR license at tdlr.texas.gov before starting work. Unpermitted electrical work violates Texas electrical code and voids homeowner's insurance coverage. The permit inspection ensures your panel meets current safety standards and handles modern electrical loads safely. Never hire an unlicensed electrician offering to skip the permit process.
How much does a 200 amp panel upgrade cost in Houston?
A 200 amp panel upgrade in Houston costs $1,700–$3,100 installed, including the required permit, inspection, and utility coordination with CenterPoint Energy. This price covers disconnection, new panel installation, breaker replacement, and reconnection. Homeowners qualify for a 30% federal IRA tax credit (up to $600) if upgrading to support solar, heat pumps, or EV chargers. Panel upgrades are essential when adding Level 2 EV chargers or modern HVAC systems that older 100 amp panels cannot support.
How long does EV charger installation take?
Level 2 EV charger installation in Houston takes 2–4 hours for standard wall-mounted units. Installation requires a dedicated 240V circuit, wiring, breaker, and a permit from Houston's building department — licensed electricians handle all permitting. CenterPoint Energy and retail providers (Reliant, TXU) offer limited rebates; check energystar.gov/rebate-finder. Federal IRA tax credits provide 30% rebate (up to $1,000) through 2032. Most Houston installations cost $1,200–$2,500 after tax credits.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in Houston homes built between 1965–1973 is a documented fire hazard per U.S. Consumer Product Safety Commission findings. Aluminum expands and contracts differently than copper, loosening connections and creating heat buildup at outlets and switches. Licensed electricians remediate this through pigtailing (copper extensions at connection points, $400–$1,000) or full rewire ($8,000–$15,000). Have your TX electrician inspect your panel immediately if your home matches this era.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in Houston immediately if you notice frequent breaker tripping, burning smell near the panel, flickering lights, or if your home has fewer than 200 amps. Defective brands like Zinsco, Federal Pacific, and Pushmatic pose fire risk and must be replaced regardless of age. Panels over 30–40 years old typically cannot handle modern loads from HVAC and EV chargers. A licensed electrician inspection costs $150–$300 and identifies replacement needs.
Are there rebates for electrical upgrades in Houston, TX?
Houston homeowners qualify for multiple electrical rebates and federal tax incentives. The IRA provides 30% tax credit for EV charger installation (up to $1,000) and 30% credit for panel upgrades supporting electrification (up to $600) through 2032. CenterPoint Energy and retail providers (Reliant, TXU) offer limited EV charger rebates — verify at energystar.gov/rebate-finder. Low-to-moderate income households may qualify for HEEHRA grants. ProvenQuote-verified electricians help you identify all available credits before starting work.
How do I find a licensed electrician in Houston?
Licensed electricians in Texas are regulated by Texas Department of Licensing and Regulation (TDLR) — verify your electrician's active license at tdlr.texas.gov. Look for proof of $1M+ liability insurance, workers' compensation coverage, and a clean permit history with Houston's building department. ProvenQuote connects Houston homeowners with verified electricians who meet all TDLR requirements and carry full insurance. Request free quotes to compare credentials, pricing, and customer reviews before hiring.
Other Electrical Services in Houston, TX
For Electrical Professionals
Are you an electrical contractor serving Houston?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.