Whole-Home Rewire in Georgetown, ON
A whole-home rewire in Georgetown replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in Georgetown: CA$8,000–CA$25,000
- Serving Georgetown & Georgetown Region
- Licensed by WSIB clearance + municipal building permit
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in Georgetown, ON
A whole-home rewire in Georgetown replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in Georgetown costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the Georgetown network are licensed through WSIB clearance + municipal building permit and carry full general liability and workers' compensation insurance. Permits are pulled through City of Georgetown Building Division. Georgetown experiences heavy snow, ice storms, freeze-thaw cycles, hail and thunderstorms — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in Georgetown, ON
Any of these indicators warrants a call to a licensed Georgetown electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed Georgetown electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in Georgetown
What to expect from a licensed Georgetown electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in Georgetown, ON
Electrical work in Georgetown ranges from simple outlet installations to major panel upgrades, depending on your home's needs and local building code requirements. ProvenQuote connects you with licensed electricians in the Georgetown area who can provide detailed quotes for your specific project. Costs reflect local Georgetown market conditions and the complexity of your electrical system.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects Georgetown, ON market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in Georgetown, ON
How much does an electrician cost in Georgetown, ON?
Licensed electricians in Georgetown charge CAD $75–CAD $150 per hour for labor, with most residential jobs costing CAD $300–CAD $2,500 total. A simple outlet installation runs CAD $150–CAD $300, while a full electrical panel upgrade costs CAD $1,500–CAD $3,500. All pricing includes the required electrical permit and inspection through Georgetown's building department. Get free quotes from ProvenQuote-verified electricians to compare estimates for your specific job.
Do I need a permit to upgrade my electrical panel in Georgetown?
Electrical panel upgrades always require a permit in Georgetown, ON. Your licensed electrician must obtain approval from Georgetown's building department before starting work. Ontario electricians must be ESA-certified to perform this work. Unpermitted electrical work can void your home insurance, create safety hazards, and delay home sales. The permit costs CAD $50–CAD $150 and includes mandatory inspections to ensure the work meets Canadian Electrical Code standards.
How much does a 200 amp electrical panel upgrade cost in Georgetown?
A 200 amp electrical panel upgrade in Georgetown costs CAD $1,500–CAD $3,500 installed, including the permit, inspection, and utility coordination. This cost covers removing your old panel, installing the new 200-amp service, and safety testing. Many Georgetown homeowners upgrade to support EV chargers, solar systems, or modern electrical loads. Ontario homeowners may qualify for the Canada Greener Homes Loan (interest-free up to CAD $40,000) or provincial OPA rebates for energy-efficient upgrades.
How long does EV charger installation take?
Level 2 EV charger installation in Georgetown takes 2–4 hours on average. Installation includes running a dedicated 240-volt circuit from your electrical panel, installing the wall-mounted charger, and safety testing per Canadian Electrical Code standards. A permit is required and costs CAD $50–CAD $100. Ontario homeowners qualify for the federal iZEV program (up to CAD $500 rebate) and OPA utility rebates. Always get quotes from ESA-certified electricians in Georgetown before proceeding.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in homes built between 1965–1973 is a fire hazard and common in Georgetown-era properties. Aluminum expands and contracts more than copper, creating loose connections that overheat and spark. Remediation involves pigtailing (connecting copper to aluminum with special connectors) for CAD $200–CAD $500 per outlet, or a full rewire for CAD $5,000–CAD $15,000. Have an ESA-certified electrician inspect your Georgetown home if built during this period.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in Georgetown immediately if breakers trip frequently, you smell burning plastic, your service is under 200 amps, or the panel contains defective brands like Zinsco or Federal Pacific. Panels over 30–40 years old should be inspected. An ESA-certified electrician inspection costs CAD $150–CAD $300 and identifies safety issues. ProvenQuote-verified electricians in Georgetown provide free replacement quotes after inspection.
Are there rebates for electrical upgrades in Georgetown, ON?
Georgetown homeowners qualify for multiple electrical rebates and incentives. The Canada Greener Homes Loan offers interest-free financing up to CAD $40,000 for energy upgrades. Ontario's OPA program provides rebates for EV charger installation (up to CAD $500) and electrical efficiency improvements. The federal iZEV program covers up to CAD $5,000 for eligible electric vehicles. Contact your local utility and ask ProvenQuote-verified electricians in Georgetown about current incentive availability before starting work.
How do I find a licensed electrician in Georgetown?
Licensed electricians in Ontario are regulated by ESA certification—verify credentials through the ESA online registry. Look for valid license, adequate liability insurance (minimum CAD $2 million), workers' compensation coverage, and a history of permitted jobs. ProvenQuote-verified electricians in Georgetown meet all safety standards and provide transparent estimates. Use ProvenQuote to compare licensed electricians, check reviews, and get free quotes before hiring.
Other Electrical Services in Georgetown, ON
For Electrical Professionals
Are you an electrical contractor serving Georgetown?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.