Whole-Home Rewire in Denver, CO
A whole-home rewire in Denver replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in Denver: $4,965–$14,900
- Serving Denver & Denver & Surrounding Areas
- Licensed by State Contractor Licensing Board
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in Denver, CO
A whole-home rewire in Denver replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in Denver costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the Denver network are licensed through State Contractor Licensing Board and carry full general liability and workers' compensation insurance. Permits are pulled through City and County of Denver Community Planning & Development. Denver experiences hail, heavy snow and ice storms — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in Denver, CO
Any of these indicators warrants a call to a licensed Denver electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed Denver electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in Denver
What to expect from a licensed Denver electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in Denver, CO
Electrical work in Denver ranges widely depending on job complexity, permit requirements, and current demand. Most homeowners in the Capitol Hill and Highlands neighborhoods pay between $200 and $8,000 for electrical projects. Get quotes from licensed electricians in your area to see exact pricing for your specific needs.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects Denver, CO market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in Denver, CO
How much does an electrician cost in Denver, CO?
Licensed electricians in Denver charge $90–$145 per hour for service calls, inspections, and repairs. A simple outlet installation runs $150–$300, ceiling fan installation costs $200–$400, and a full kitchen rewire ranges $2,000–$5,000. All pricing includes the required electrical permit and local building department inspection. Get free quotes from ProvenQuote-verified electricians to compare estimates for your specific Denver project.
Do I need a permit to upgrade my electrical panel in Denver?
Electrical panel upgrades always require a permit in Denver through the local building department. All licensed electricians in Colorado must hold an Electrical Contractor License from Colorado Department of Regulatory Agencies (DORA)—verify credentials at dora.colorado.gov. Unpermitted electrical work voids homeowner's insurance, creates safety hazards, and blocks future home sales. Never hire unlicensed contractors; ProvenQuote connects you with verified Denver electricians only.
How much does a 200 amp panel upgrade cost in Denver?
A 200 amp panel upgrade in Denver costs $2,000–$4,000 installed, including permit, inspection, and Xcel Energy utility coordination. Homeowners qualify for a 30% federal IRA tax credit (up to $600) for qualifying panel upgrades through 2032. Panel upgrades support EV charger installation, solar systems, and modern home electrical loads. All work requires a permit from Denver's building department and inspection by a licensed electrician verified through DORA.
How long does EV charger installation take?
Level 2 EV charger installation in Denver takes 2–4 hours for standard setups, longer if panel upgrade or new circuit is needed. Installation requires a permit from Denver's building department. Denver homeowners qualify for the federal IRA 30% tax credit (up to $1,000) plus Xcel Energy rebates up to $500. ProvenQuote-verified electricians handle all permitting and utility coordination so you claim available incentives.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in Denver homes built between 1965–1973 is a documented fire hazard per U.S. Consumer Product Safety Commission findings. Aluminum corrodes at connection points, causing dangerous heat buildup. Remediation options include pigtailing (copper connections at outlets) costing $800–$2,000 or full rewire costing $8,000–$15,000. Licensed electricians in Denver can inspect for aluminum wiring and recommend safe solutions.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in Denver immediately if breakers trip constantly, you smell burning odors, the panel is under 200 amps, it contains defective brands (Zinsco, Federal Pacific, Pushmatic), or exceeds 30–40 years old. A licensed electrician inspection costs $150–$300 and identifies safety hazards. ProvenQuote connects you with DORA-verified Denver electricians who perform comprehensive panel evaluations and provide written estimates for replacement.
Are there rebates for electrical upgrades in Denver, CO?
Denver homeowners qualify for multiple electrical rebates: federal IRA 30% tax credit for EV chargers (up to $1,000), 30% for panel upgrades (up to $600), Xcel Energy EV rebate (up to $500), and Colorado EV tax credit. HEEHRA provides grants for low-to-moderate income households upgrading panels or installing chargers. Get free quotes from ProvenQuote-verified Denver electricians—they ensure you capture all available incentives during installation.
How do I find a licensed electrician in Denver?
Licensed electricians in Colorado are regulated by Colorado Department of Regulatory Agencies (DORA)—verify all licenses at dora.colorado.gov. Check that contractors hold current state licensing, carry $1M+ liability insurance, maintain workers' compensation, and have clean permit histories. ProvenQuote vets all electricians before connecting them to Denver homeowners, ensuring background verification, licensing confirmation, and customer reviews. Compare free estimates from multiple verified professionals.
Other Electrical Services in Denver, CO
For Electrical Professionals
Are you an electrical contractor serving Denver?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.