Whole-Home Rewire in Atlanta, GA
A whole-home rewire in Atlanta replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in Atlanta: $4,565–$13,696
- Serving Atlanta & Atlanta & Surrounding Areas
- Licensed by State Contractor Licensing Board
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in Atlanta, GA
A whole-home rewire in Atlanta replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in Atlanta costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the Atlanta network are licensed through State Contractor Licensing Board and carry full general liability and workers' compensation insurance. Permits are pulled through City of Atlanta Department of Buildings. Atlanta experiences hurricane and tropical storms — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in Atlanta, GA
Any of these indicators warrants a call to a licensed Atlanta electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed Atlanta electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in Atlanta
What to expect from a licensed Atlanta electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in Atlanta, GA
Electrical work in Atlanta ranges from simple outlet installations to major panel upgrades and generator installations. Pricing depends on job complexity, materials, and permit requirements from the City of Atlanta Department of Buildings. Get quotes from licensed local electricians to compare rates for your specific project.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects Atlanta, GA market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in Atlanta, GA
How much does an electrician cost in Atlanta, GA?
Licensed electricians in Atlanta charge $80–$125 per hour for labor, plus materials and permit fees. A simple outlet installation costs $150–$300, ceiling fan installation runs $200–$400, and a full kitchen rewire averages $1,500–$3,000. All pricing includes the required electrical permit from Atlanta's Building Department. Service calls and diagnostics typically cost $100–$200. Get free quotes from ProvenQuote-verified electricians in Atlanta to compare exact pricing for your specific job before any work begins.
Do I need a permit to upgrade my electrical panel in Atlanta?
Electrical panel upgrades always require a permit in Atlanta—unpermitted work voids your homeowner's insurance and creates serious fire hazards. Atlanta's Building Department issues the permit after your licensed electrician submits plans. The contractor must be licensed by Georgia Secretary of State as a Class I, II, or unrestricted Electrical Contractor; verify credentials at sos.ga.gov. Unpermitted work can result in fines up to $1,000 and code violations during home sales. ProvenQuote connects you with licensed electricians who handle all permits and inspections required by Atlanta code.
How much does a 200 amp panel upgrade cost in Atlanta?
A 200 amp panel upgrade in Atlanta costs $1,700–$3,200 installed, including labor, materials, permit ($150–$300), and utility company inspection. The work requires a Georgia Secretary of State–licensed electrician and takes 1–2 days. Homeowners qualify for a 30% federal IRA tax credit (up to $600) for qualifying panel upgrades through 2032. Panel upgrades support EV chargers, solar systems, and modern electrical loads. Get free quotes from licensed electricians in Atlanta—they'll verify IRA eligibility and ensure Georgia Power coordinates the upgrade properly.
How long does EV charger installation take?
Level 2 EV charger installation in Atlanta takes 2–4 hours for a standard 240V installation, plus 1–2 weeks for permit approval from Atlanta's Building Department. Installation costs $500–$1,500 including labor and materials. Atlanta homeowners qualify for Georgia Power's EV charger rebate (up to $250) and federal IRA 30% tax credit (up to $1,000) through 2032. A Georgia Secretary of State–licensed electrician must pull the permit and verify your panel capacity. ProvenQuote-verified electricians in Atlanta handle all permits, rebates, and Georgia Power EV rate plan enrollment.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in Atlanta-area homes built between 1965–1973 is a fire hazard, per the U.S. Consumer Product Safety Commission. Aluminum corrodes at outlets and switches, causing heat buildup and fire risk. Remediation options include pigtailing copper wire to every connection ($800–$2,000) or complete rewiring ($3,000–$8,000). Many Atlanta homes from that era contain aluminum wiring. Have a licensed Georgia electrician inspect for aluminum wiring during your next service call. ProvenQuote connects you with electricians experienced in safe aluminum wire remediation in Atlanta.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in Atlanta immediately if breakers trip frequently, you smell burning near the panel, your home has under 100 amps, or your panel is over 30–40 years old. Defective brands—Zinsco, Federal Pacific, and Pushmatic—fail prematurely and require replacement regardless of age. Signs include flickering lights, warm panel surfaces, and rust inside the box. A licensed Georgia electrician inspection costs $150–$300 and identifies unsafe conditions. ProvenQuote-verified electricians in Atlanta provide free quotes for panel replacement and handle all permits and Georgia Power coordination.
Are there rebates for electrical upgrades in Atlanta, GA?
Atlanta homeowners qualify for multiple electrical rebates and tax incentives. Georgia Power offers up to $250 rebate for EV charger installation. The federal IRA provides 30% tax credit for EV chargers (up to $1,000) and 30% for panel upgrades (up to $600) through 2032. Low-to-moderate income households in Georgia may qualify for HEEHRA grant funding. Georgia Power also offers discounted EV rate plans. Licensed electricians in Atlanta verify your eligibility and submit rebate paperwork automatically. Get free quotes from ProvenQuote to see exact incentives for your specific upgrade.
How do I find a licensed electrician in Atlanta?
Licensed electricians in Georgia are regulated by Georgia Secretary of State—verify Class I, II, or unrestricted Electrical Contractor License at sos.ga.gov before hiring. Require proof of $1M+ liability insurance and workers' compensation coverage. Check permit history through Atlanta's Building Department and read customer reviews. Avoid cash-only jobs and unlicensed contractors—they skip permits and create legal liability. ProvenQuote verifies all electrician licenses, insurance, and background checks before connecting you with qualified professionals in Atlanta, saving you hours of vetting.
Other Electrical Services in Atlanta, GA
For Electrical Professionals
Are you an electrical contractor serving Atlanta?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.